This because there was no consent to the connection of the phone on the dash cam pro side. Please follow the steps below to reconnect: (1) Go to personal center – “My devices” and tap “70mai Smart Dash cam Pro” to enter the device detail page. And delete the device from the device list. Note: During the process of deleting a device, you must ensure that the mobile phone network can be used. Otherwise, only the local device information is deleted. After connect with the Internet, the device information will be renewed from the cloud. (2) After successfully delete the device, please add the device again then connect.
1. Question: Is there an option to quickly mute all sounds (for example when the kid is fell asleep in the car)? 2. Suggestion: it would be very nice if ADAS can differentiate two types of lines: solid lines and intermittent (broken white line). It would be great if I can disable notification for broken white line and keep it for solid lines. The other option is that 70mai pro will try to hear the sound of turn signal and will not notify about broken line crossing.
I also need a Mute function. My suggestion: Option 1: Double tap on a power button - switch between 1) Mute and 2) Unmute Option 2: Double tap on a power button - switch among: 1) Mute 2) Just sounds (different short beeps) 3) Full voice notifications.
I would also like the next 70 mai device to have 2 cameras, one is directed to the driver and analyzing his condition (if he is not attentive enough / sleepy). Two safety devices in one would be just perfect.
Hi would it be possible to modify a bit the camera design to be able to turn around by 180 degree and not only a few degree up and down?? If it can turn around it can easily monitor the back side of your car plus record the cabin inside when you leave the car. Otherwise is not so funny to hear the sound how you has been burgled, but camera recording in opposite direction and you have no picture from the perpetrator! What do you think?
I have a further suggestion for a "silent mode": LED indicator on the camera can notify "silently" about dangerous situation (in ADAS mode). For example: - Blinking red light - collision warning - Blinking blue light - line change - Blinking green light - car in front begins its movement. But LED brightness should be higher during these events. Maybe I would even suggest to add this indication not only in silent mode but in normal mode as well.
I have the same problem.
I don't see any device in my devices page.
I did reset factory to the dash cam.
I can connect to the cam wifi but but can't do authorization from my phone.